Swing gates


Remote control operators for swing gates in los angeles

 

dksdks-6002-header

DoorKing 6002 Light Duty Swing Gate Actuator

The DKS swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and elimination the need for concrete pads. The elegant lines obtained by using extruded aluminum material provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps.

These actuators feature built in limit switches that precisely control the start/stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and is available in a standard and deluxe housing. The deluxe housing provides three 120 VAC convenience outlets to power additional auxiliary device transformers (for telephone entry systems, for example). Both come standard with built-in battery back-up installed.

6002 Actuator Control Panels
4″W x 3.75″H* x 48″L 12.25″W x 4.25″D x 16.25″ or 24.25″H
dks-6002_tn dks-6002_control

Advanced Features

  • Internal adjustable limit switches.
  • Slow start/slow stop.
  • Overlap feature for dual swing gate operation.
  • Magnetic lock output.
  • Ports for plug-in loop detectors.
  • Fully enclosed screw drive.
  • 120 VAC input power, 24 VDC operating power.
  • Built-in battery back-up.
  • Separate control panel.
  • Keyed release for manual operation.

dks-6050-100-header

DoorKing 6050/6100 Residential and Commercial

The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC convenience Open option which will automatically open the gate in the event of a power outage.

Pad Mount Post Mount
13.25″W x 12″H* x 23″D 13.25″W x 12″H* x 23″D
dks-gate_6050-pad dks-gate_6050-post

Advanced Features

  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (Option on 6100 only).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

dks-6300-header

DoorKing 6300 Commercial and Industrial

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming filed modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Pad Mount Post Mount
13.25″W x 12″H* x 28″D 13.25″W x 12″H* x 28″D
dks-gate_6300-pad dks-gate_6300-post

Advanced Features

  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (optional).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

elite1

csw200ul_cw_detail

CSW200UL

Commercial Swing Gate Operator

The CSW200UL models of swing gate operators are the first choice for heavy-traffic applications such as large gated communities, residential developments, commercial complexes, and private estates. Unlike other systems, the CSW gate operators are designed with a “non-scissor action” swing arm to greatly reduce the risk of injury. And all models include the safety and reliability of our OmniControlTM board, the most advanced control board in the industry.

Featuring the highest quality components and backed by years of proven dependability, each unit is carefully inspected and mechanically tested to provide unsurpassed reliability. Unique engineering innovations in each model also ensure that there’s a CSW to meet practically every swing gate application.

  • 120V AC power
  • 24V DC board
  • Built-in radio receiver
  • Highly efficient, extremely quiet
  • Surge/lightning protection
  • Alarm reset button
  • Weatherproof high-density polyethylene cover
  • Gold zinc-plated chassis eliminates corrosion
  • High-speed precision limit switches
  • Solid steel, machined pulley
  • #41 chain
  • 7-year warranty for residential applications;
  • 5-year warranty for commercial applications

The CSW200UL gate operator is available in the following models:

  • CSW200UL: standard model with a polyethylene cover
  • CSW200ULST: standard model with a stainless steel cover
  • CSW200ULDM: dual motor for heavier traffic and higher temperatures
  • CSW200UL1HP: heavy-duty, 1 horsepower model for heavier gates

mir_1_arm_cw_detail

Miracle-OneTM

24V DC Residential Linear Gate Operator

The Miracle-OneTM is a DC-powered swing gate operator designed to deliver smooth, ultra-quiet performance. With state-of-the-art features like a battery backup, anti-theft alarm system, variable speeds and optional solar panels, this gate operator makes security smart. Even smarter is the ease with which this system can be installed. Backed by the most comprehensive support available, the Miracle-OneTM is the complete solution.

  • Variable speed, 24 V DC
  • Battery backup
  • 600 pounds of torque for exceptional power
  • Built-in radio receiver compatible with Security+® transmitters
  • Improved limit switch system
  • Ultra-quiet operation
  • External alarm reset button
  • Weatherproof housing
  • Compact modern design
  • Emergency key release
  • ERD and alarm included
  • Dust protector
  • Added surge protection and spike suppression
  • 2-year warranty

la400_cw_detail

LA400

Residential DC Linear Gate Operator

The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 feet long and weighing up to 550 pounds.

An on-board radio receiver is included with the LA400. Exclusive from Chamberlain®, this provides a single remote control solution for gates and additional access points.

  • On-board radio receiver
  • DC operator system
  • Battery-run system
  • Slow start/stop
  • Inherent obstruction sensing
  • External obstruction sensing
  • Control inputs
  • Bi-part latch
  • Timer to close
  • LED indicators
  • Electronic limit system
  • Keyed manual disconnect
  • 2-year warranty
allomatic
new-sw-300-pic-small

SW-300 Swinger

The SW-300 is our residential and commercial gate operator. This will swing gates up to 18ft and 800lbs. You can see the SW-300 installed master/slave in front of gated communities as well as homes with circular driveways and any flag lot where lateral space is limited. Its silent, elegant slow-stop & slow-start features is the envy of the industry.

Specifications
UL 325 & UL 991 Compliant
Warranty Full 7 Year Residential, 5 Year Commercial
Motor ½ HP
Duty Cycle Continuous
Power Options 120 VAC
Gear Box Ratio 60:1
Cover Rotationally Molded – Indestructible
Dimensions W: 12”- L: 17” – H: 25.5
Maximum Gate Length 18 Feet
Maximum Gate Weight 800 lbs
Gate Speed 90 degrees travel in 17 sec
Operator Weight 110 lbs
Emergency Release Options Patented No-Bind, Band release Arm
Battery Backup Compatible

gateinner

SW-350 Swinger

This is our commercial swing operator. The SW-350 is capable of swinging gates up to 22ft and 2000lbs. This is for the tough jobs. The SW-350 is ‘heavy metal’.

Specifications
Dimensions W: 14”- L: 24” – H: 18”
Weight 25 Lbs
Maximum Gate Length 22’ w/ 1 HP Motor
Maximum Gate Weight 800-1/2HP Motor, 1200-3/4HP Motor, 1500-1HP Motor
Gate Speed 180 Degrees in 17 Sec

faac

Model 760

sw7-model760

760

UL 325 Compliant, CSI # 02820 – Gate Operators

The Model 760 in-ground hydraulic swing gate operator is designed for underground installation in residential applications.

The Model 760 can be packaged to include the following:

  • One or two drive pump units
  • One or two load bearing boxes
  • One 455 D control panel
  • One plug-in radio receiver
  • Two radio transmitters
  • Two photobeam sets for opening and closing reversing devices
  • 115 VAC receptacle for accessories (5 amp max)
  • ON/OFF switch controlling power to control panel, accessories and plug outlet
  • Large pre-wired terminals for easy wiring to control panel
  • Test button
  • Two or four warning signs

NOTE: FAAC systems can be packaged to be fully UL-325 compliant, right out of the box, which means there’s no need to purchase any additional peripherals.

Models 420 and 422

10sm

422

UL 325 Compliant, CSI # 02820 – Gate Operators

The Models 420 and 422 hydraulic swing operators are designed for single family residential use.

The Model 402 and 422 can be packaged to include the following:

  • One or two hydraulic gate operators with mounting hardware
  • One 455 D control panel
  • One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
  • Two photobeam sets for opening and closing reversing devices
  • One or two manual release keys
  • One plug-in radio receiver
  • Two radio transmitters
  • 115 VAC receptacle for accessories (5 amp max)
  • ON/OFF switch controlling power to control panel, accessories and plug outlet
  • Large pre-wired terminals for easy wiring to control panel

Model 400

model400release_72

11

model_400_72

UL 325 Compliant, CSI # 02820 – Gate Operators

The Model 400 heavy duty hydraulic swing gate operator is specifically designed for situations needing maximum versatility, such as apartment, subdivision, commercial & industrial, and certain residential applications.

The Model 400 can be packaged to include the following:

  • One or two hydraulic gate operators with mounting hardware
  • One 455 D control panel
  • One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
  • Two photobeam sets for opening and closing reversing devices
  • One or two manual release keys
  • One plug-in radio receiver
  • Two radio transmitters
  • 115 VAC receptacle for accessories (5 amp max)
  • ON/OFF switch controlling power to control panel, accessories and plug outlet
  • Large pre-wired terminals for easy wiring to control panel
  • Test button
  • Two or four warning signs
  • See the new Locking Cap for our Model 400 and 422 operators

NOTE: FAAC systems can be packaged to be fully UL-325 compliant, right out of the box, which means there’s no need to purchase any additional peripherals.